High Tonnage Car Parts Production Line ALH Series ALH-800 Crankshaft Presses Punching Machine for Motor Parts High Efficiency

CHARACTERISTICS OF ALH SERIES EQUIPMENT
1、Four pillar closed-type fame, small deformation in front and back,and fit to continuous die manufctur.
2、Eight-surface guide way,steady and rtustworthy precision.
3、Circule lubrication system improve machine working environment.
4、Perfect man-machine protection system , its accord with punch standard.

Model:
ALH-800
Brand:
KINGLAN

Availability:

Quantity:



Inquire Add to Basket

BASIC PARAMETERS OF ALP SERIES

Model	Unit	ALH-250MB		ALH-300MB		ALH-400MB		ALH-500MB		ALH-630MB		ALH-800MB		ALH-1000MB
Type	Ton	250		300		400		500		630		800		1000
Stroke	mm	300	350	300	350	300	350	300	350	300	400	400	400	400	400
Stroke Per Minute	S.P.M	20-35	20-35	20-35	20-35	20-35	20-30	20-35	20-30	15-40	15-25	15-25	15-25	15-25	15-25
Tonnage Rated Point	mm	7	7	7	7	9	9	9	9	10	13	10	13	10	13
Die Height(D.H)	mm	800	800	800	800	700	800	700	800	1000	1000	1000	1000	1000	1000
Slide Adjustment	mm	200	200	200	200	250	250	300	250	350	350	400	400	400	400
Slide Area	mm	2500*1200	2770*1250	2500*1200	2770*1300	3000*1400	3400*1500	3000*1400	3400*1500	3800*1600	4200*1800	4000*1800	4500*1800	4000*1800	4500*1800
Bolster Area	mm	2600*1200	3000*1250	2600*1200	3000*1400	3000*1400	3400*1500	3000*1400	3400*1500	3800*1600	4200*1800	4000*1800	4500*1800	4000*1800	4500*1800
Side Opening Size	mm	1100*850	1100*850	1100*900	1100*900	1250*1000	1250*1000	1250*1000	1250*1000	1500*1100	1500*1100	1500*1100	1500*1100	1500*1100	1500*1100
Main Motor	KW*P	30*4	30*4	37*4	37*4	45*4	45*4	55*4	55*4	75*4	75*4	90*4	90*4	110*4	110*4
Press Accuracy		CNS(JIS)1cIass
Die Cushion(Optional)		One Plate Two Cylinder
Capacity	Ton	40	40	50	50	60	60	80	80	80	80	100	100	120	120
Stroke Length	mm	0-150	0-150	0-180	0-180	0-180	0-180	0-180	0-180	0-180	0-180	0-180	0-180	0-200	0-200
Cushion Area	mm	One Plate Two Cylinder

ACCESSORIES

STANDARD ACCESSORIES		OPTIONAL ACCESSORIES
Hydraulic overload protection device	S	Pneumatic Die Cusion Device	O
Inverter	S	Quick Die Change Device (Die Lifter,Clamp And Die Arm）	O
Electric Slide Adjust Device	S	Slide Knock-out Device	O
Manual Slide Adjust Device (ALP-60 and below)	S	Anti-vibration pad	O
Electric Die Height Indicator	S	Photoelectric safety device	O
Slide and die balancing device	S	Feeder	O
Rotary Cam Switch	S	Uncoiler	O
Crank Angle Indicator	S	Leveler	O
Air Source Connector	S	Transfer Arm	O
Precut Counter	S
Preset Counter	S
Overrun protection device	S
Tool Box	S
Operation Manual	S
Centralized Oil Iubrication	S
Misfeeding Detection Socket	S
Die Room Light	S