H (Straightside) Frame Crank Type Mechanical Stamping Press

Closed type mechanical presses are mainly composed of frame, working table, beam, main drive, clutch, brake, micro adjustment device, slider, air pipeline, balancer, lubrication system, main oil tank, die cushion, ladder, electrical control system and other components.

  • ALE Double Crank H Frame Press

    ALE Double Crank H Frame Press

    ALE series press machine is one of the hot products of KINGLAN high-precision press machines. It adopts the structure of closed type double-crank, frame made by welded steel plate which processed thro...
  • ALD Single Crank Semi-closed Press

    ALD Single Crank Semi-closed Press

    The ALD series is a semi-closed crank press independently developed by KINGLAN to meet customer needs. It has the characteristics of small change of mold height, small deviation of dynamic center, sma...
  • ALF Single Crank Closed Press

    ALF Single Crank Closed Press

    The ALF series presses have an integrated welding machine body and a crankshaft drive. Closed single-point circulation thin oil lubrication, which further improves the working environment of the machi...
  • ALT Double Crank Integrated H Frame Press

    ALT Double Crank Integrated H Frame Press

    The ALT series presses are closed type double-point circulating thin oil lubrication. The ultra-long eight-sided guide rails can maintain good precision under a little eccentric load due to the two fo...
  • ALH Double Crank Separated H Frame Press

    ALH Double Crank Separated H Frame Press

    The ALH series press machine adopts a three-divided frame. The reinforcing rod is used to pre-tighten the top seat, the middle platform and the base into a whole, which has strong rigidity. The whole ...
  • ALM Series Special Press for Battery Case

    ALM Series Special Press for Battery Case

    The battery shell deep drawing press machine and the battery shell pres line conform to the high-speed development needs of new energy vehicles and smart phone batteries. With the concept of “innovat...

H Frame Press Features in Structure:

1)The frame and beam are steel welded structures;

2) The main drive of sheet metal stamping machine adopts a fully enclosed arrangement, and the clutch brake adopts a suspended small inertia structure;

3) Large tonnage presses use movable working table, hydraulic clamp, upper mold clamping using pneumatic clamp or hand-held hydraulic clamp;

4) The main friction parts are wear-resisting, and adopt the automatic quantitative circulation lubrication or grease lubrication, and have detection devices in important parts;

5) With hydraulic overload protection device, die height adjustment and torque protection device;

6) Movable working table is driven by electric or pneumatic motor;

7) The micro adjustment device adopts a worm gear structure;

8) Die cushion has many types of structure, for example, hydraulic, gas-liquid, for single-cylinder, double-cylinder, single-top crown, stroke adjustment, lock-up hysteresis, etc;

9) With photoelectric protection and front and rear safety guards.

  • TEL:+86-21-5410-0878
  • ADDRESS:No 19,Huanglong 3rd Road, Huanglong Industrial Zone, Wuyi, Zhejiang,China