The ALT series h type press machine is closed type double-point circulating thin oil lubrication. The ultra-long eight-sided guide rails can maintain good precision under a little eccentric load due to the two force points and large space. The crankshaft and the slider device are connected by a double-link transmission device; the double-link transmission device comprises two sets of synchronous connecting rods provided on the crankshaft. The synchronous connecting rod is connected with an adjusting screw sleeve which has fixed connection with the slider device.
1. The slider guide adopts a four-corner and eight-faced super long guide rail which has a strong anti-offset ability. The push-pull bolts on the column facilitate the adjustment of the guide rail clearance to ensure the accuracy of the retention.
2. With electronic cam, it has the function of preventing the slider from repeating in the single stroke operation.
3. The oil tank of the hydraulic system has oil level monitoring, cleanliness detection and alarm function. The oil pump inlet is equipped with an oil filter, and the oil outlet is equipped with pressure detection to ensure that the hydraulic system oil meets the design standards.
4. The control core of the press adopts PLC and is equipped with a touch screen man-machine interface. The components of the press system are reasonably configured, and the key components are imported well-known brands.
5. It adopts international famous brand photoelectric protection device to make sure press in completely safe working conditions.
6. Each of the four columns has an emergency stop button. Press is equipped with a mobile button station and with an emergency stop button.
|Rated Tonnage Point||mm||7||7||9||9||9|
|Speed Per Minute||s.p.m||20-40||20-40||20-30||20-30||20-30|
|Slide Area（L.R * F.B）||mm||2300x1100||2300x1100||2600×1100||3000×1100||3100×1200|
|Bolster Area（L.R * F.B）||mm||2500x1200||2500x1200||2700x1200||3100x1200||3200x1300|
|Slide Opening(F.B * H)||mm||600x500||650x600||900x600||1000x600||1000x60|
|Slide Adjust Device||kw*4p||2.2||2.2||3.7||3.7||4|
|Hydraulic Over-load Protector||●||Electrical Automatic Lubrication System||○|
|Inverter||●||Pneumatic Die Cusion Device||○|
|Slide Adjust Device||●||Foot Switch||○|
|Die Heigh Indicator||●||Quick Die Change Device (Die Lifter,Clamp And Die Arm Shift Mode）||○|
|Rotary Cam Switch||●||Slide Knock-out Device||○|
|Crank Angle Indicator||●||Misfeed Detection Consent||○|
|Power Supply||●||Anti Vibration Press Mount||○|
|Electric Stroke Counter||●||Photo-electronic Safety Device||○|
|Air source Recepatacle||●||Feeder||○|
|Against Over-run Safety Device||●||Machanism Hand||○|
|Maintenance Tool Box||●||Die Room Light||○|