KINGLAN
  • C Frame Press
  • H Frame Press
  • Eccentric Gear Press
T4L8 Four Point Eight Link Mechanical Press T4L8 Four Point Eight Link Mechanical Press
The T4L8 series press is a four point eight-linkage press. I...
ALP Single Crank C Frame Press ALP Single Crank C Frame Press
The ALP series of open-type fixed table presses are general-...
T2 Two Point Eccentric Gear Driving Press T2 Two Point Eccentric Gear Driving Press
The T2 series press is a two-point eccentric type press. The...
ALE Double Crank H Frame Press ALE Double Crank H Frame Press
ALE series press machine is one of the hot products of KINGL...
ALC Double Crank C Frame Press ALC Double Crank C Frame Press
The ALC series of open type double crank press is one of the...
ALD Single Crank Semi-closed Press ALD Single Crank Semi-closed Press
The ALD series is a semi-closed crank press independently de...
T4 Four Point Eccentric Gear Link Type Press T4 Four Point Eccentric Gear Link Type Press
The T4 series press is a four-point eccentric type press wit...
ALF Single Crank Closed Press ALF Single Crank Closed Press
The ALF series presses have an integrated welding machine bo...
ALT Double Crank Integrated H Frame Press ALT Double Crank Integrated H Frame Press
The ALT series presses are closed type double-point circulat...
ALH Double Crank Separated H Frame Press ALH Double Crank Separated H Frame Press
The ALH series press machine adopts a three-divided frame. T...
ALM Series Special Press for Battery Case ALM Series Special Press for Battery Case
The battery shell deep drawing press machine and the battery...
ALP Single Crank C Frame Press ALP Single Crank C Frame Press
The ALP series of open-type fixed table presses are general-...
ALC Double Crank C Frame Press ALC Double Crank C Frame Press
The ALC series of open type double crank press is one of the...
ALE Double Crank H Frame Press ALE Double Crank H Frame Press
ALE series press machine is one of the hot products of KINGL...
ALD Single Crank Semi-closed Press ALD Single Crank Semi-closed Press
The ALD series is a semi-closed crank press independently de...
ALF Single Crank Closed Press ALF Single Crank Closed Press
The ALF series presses have an integrated welding machine bo...
ALT Double Crank Integrated H Frame Press ALT Double Crank Integrated H Frame Press
The ALT series presses are closed type double-point circulat...
ALH Double Crank Separated H Frame Press ALH Double Crank Separated H Frame Press
The ALH series press machine adopts a three-divided frame. T...
ALM Series Special Press for Battery Case ALM Series Special Press for Battery Case
The battery shell deep drawing press machine and the battery...
T4L8 Four Point Eight Link Mechanical Press T4L8 Four Point Eight Link Mechanical Press
The T4L8 series press is a four point eight-linkage press. I...
T2 Two Point Eccentric Gear Driving Press T2 Two Point Eccentric Gear Driving Press
The T2 series press is a two-point eccentric type press. The...
T4 Four Point Eccentric Gear Link Type Press T4 Four Point Eccentric Gear Link Type Press
The T4 series press is a four-point eccentric type press wit...

ALD Single Crank Semi-closed Press

The ALD series is a semi-closed crank stamp press machine independently developed by KINGLAN to meet customer needs. It has the characteristics of small change of mold height, small deviation of dynamic center, small amount of stamping deformation, and low noise of blanking cutting. The fixed-lock six-sided guide rail and high-rigidity body realize high-precision stamping of the product, and the life of the mold is also greatly improved.



ALD Single Crank Semi-closed Press

Stamp Press Machine Features:


1. Built-in transmission construction, no gear or flywheel injury to personnel

2. Emergency button can instantly stop the machine at any time, well handling unexpected accidents.

3. Safety loop device of two-hand operation requires synchronous press within 0.2s to get operated, protecting the safety of personnel.

4. Overload automatic protection device can instantly detect exceeded pressure and make an emergency stop within 0.01s, avoiding press, mould and personnel injury.

5. Cam failure detection circuit can effectively avoid dangerous accidents caused by cam wear.

6. The use of photoelectric safety device can make the machine emergency stop if detecting foreign matter into dangerous zone, avoiding danger.  

7. The interconnected control loop consisting of imported solenoid valve and cam device ensures correct movement of clutch, impossible occurrence of continuous stamping.

8. When brake pad wears causing long time braking and angle deflection, machine can automatically detect and give signal to avoid danger.

9. Electrical box’s power-off device (when open the door, power will be off) ensures the safety of electrical maintenance.

10. The safety net setting on the back of the machine guarantees the safety of personnel.



H Frame Press Specification


Technical Parameter
Item ALD-80 ALD-110 ALD-160 ALD-200
Model H V H V H V H
Capacity Ton 80 110 160 200
Rated Tonnage Point mm 4 2 6 3 6 3 6 3
Stroke mm 150 70 180 80 200 90 200 100
Die Height mm 340 380 360 410 460 510 460 510
Stroke per Minute  s.p.m 35~80 80~120 30~60 60~90 20~50 40~70 20~50 50~70
Slide Adjustment mm 80 80 100 110
Slide Area mm 560×420×70 650×470×80 700×550×90 850×630×90
Bolster Area mm 740×550×90 880×600×110 960×800×140 1120×820×160
Main Motor kw.p 5.5×4 7.5×4 11×4 15×4
Slide Adjust Device Electric Driving
Air Pressure kg/cm² 5~6 5~6 5~6 5~6
Presses Dimension mm 1300×1890×3000 1420×1985×3200 1600×2200×3500 1750×2500×3900
Presses Precision CNS(JIS)1class
Capacity Ton 3.6 6.3 10 14
Stroke mm 70 80 80 100
Die Cushion effectiv Area mm 450×310 500×350 650×420 710×480

Mechanical Single Crank Semi-closed Press Accessories


Accessories Standard Accessories Optional
Hydraulic Over-load      Protector    Electrical Automatic Lubrication System
Manual drive Lubrication System Pneumatic Die Cusion Device
Inverter Presrt Counter
Electrical Slide Adjust Device  Presrt Counter
Electrical Die HEIGH Indicator  Foot Switch
Balance Device Quick Die Change Device (Die Lifter,Clamp And Die Arm shift mode)
Rotary Cam Switch Slide Knock-out Device
Crank Angle Indicator Misfeed Detection Consent
Electric Stroke Counter Power Supply 
Air source Recepatacle Anti Vibration Press Mount
Against Over-run Safety Device Photo-electronic Safety Device
Maintenance Tool Box Feeder
Operation Manual Uncoiler
Leveler
Machanism Hand
Die Room Light
Left(rithgt)feeeding device
ALD Single Crank Semi-closed Press Photos
Related News
Software System Design of Automatic Feeder for Power Press

Software System Design of Automatic Feeder for Power Press

09/05/2019
PLC Main Program DesignPLC executes a procedure from beginning to the end. The program enters the image area from the input port. Each input port reads the port state from the memory, and then writes ...
Hardware Selection of Automatic Feeder for Power Press System

Hardware Selection of Automatic Feeder for Power Press System

08/05/2019
LC and Module SelectionThe hardware system of the automatic screw automatic feeder for power press uses Omron's CP1 PLC as the core controller. During the pressing process, the cylinder is used to dri...
WE WILL REPLY TO YOU QUICKLY
For quality and efficiency purposes, please take care with information accuracy.
  • TEL:+86-21-5410-0878
  • EMAIL:sales@jinaolan.cc
  • ADDRESS:No 19,Huanglong 3rd Road, Huanglong Industrial Zone, Wuyi, Zhejiang,China